Helbreath Centenario (Files + Sources)

#1
Santana:
/activar (Commands for GMs)

I forget to fix the unconnection time. Edit the following in SRC CLIENTE , Game.cpp :

Code: Select all

if ((dwTime - m_dwLogOutCountTime) > 100)
for

Code: Select all

if ((dwTime - m_dwLogOutCountTime) > 1000)
The 1000 is the normal , and the 100 disconnects more faster, don't forget!
You do not have the required permissions to view the files attached to this post.
There is no greater education than one that is self-driven.

Re: Helbreath Centenario (Files + Sources)

#4
LifeX wrote:
Sat Sep 30, 2017 2:43 pm
There are several possibilities here.

1) Your port isn't open via your router.
2) Your post isn't open in your Windows Firewall.
3) Your IP config is not correct inputted into GServer.

You need to make sure all 3 things is done correctly. Good luck.
1- What ports number need open in router?
2- post isn't open in your Windows Firewall what it is?
3- ip config in GServer :

[CONFIG]

gate-server-dns = false
log-server-dns = false
game-server-name = Cente
game-server-port = 9234
game-server-address = 192.168.1.xxx
game-server-internal-address = 192.168.1.xxx
game-server-external-address = 200.114.xxx.xxx
log-server-address = 192.168.1.xxx
internal-log-server-port = 5421
gate-server-address = 192.168.1.xxx
gate-server-port = 7396
game-server-mode = LAN

that is correct?

Re: Helbreath Centenario (Files + Sources)

#5
1- What ports number need open in router?
-> MainLog = 1847, and HGServer Port 9234. Go to http://www.whatsmyip.org/port-scanner/ to check if your port is open after Server is activated.

2- post isn't open in your Windows Firewall what it is?
-> Go to your control panel > Windows Firewall and allow the Windows Firewall to allow your port to be open.

3- ip config in GServer :
This is correct, providing all your ip are correct.
LifeX

www.hblegends.net

Re: Helbreath Centenario (Files + Sources)

#6
LifeX wrote:
Fri Dec 29, 2017 3:16 am
1- What ports number need open in router?
-> MainLog = 1847, and HGServer Port 9234. Go to http://www.whatsmyip.org/port-scanner/ to check if your port is open after Server is activated.

2- post isn't open in your Windows Firewall what it is?
-> Go to your control panel > Windows Firewall and allow the Windows Firewall to allow your port to be open.

3- ip config in GServer :
This is correct, providing all your ip are correct.
i have that ports open is correct? all in TCP http://i64.tinypic.com/11r95py.jpg

Who is online

Users browsing this forum: No registered users and 1 guest

cron